We are supported by our readers, and we receive affiliate rewards when you click on and purchase from our links.

47 Best jack stands in 2022 on Reddit [According to 48 Redditors]

With so many jack stands options available in the market, choosing the one that is suitable for your needs can be confusing. Reddit is a place where a lot of people discuss doubts, experiences, and share recommendations. I used AI to analyze around 28 posts on different subreddit posts to make a list of 47 best jack stands in 2022.

Based on what 48 Redditors think, here are the top-rated jack stands in 2022. However, the best one is different for different use-cases. That’s why before purchasing one, make sure that the selection you’ve made solves all your jack stands requirements.

Note: We monetize via commission model, we don’t include sponsored product placements in our best-sellers list. It means that we will only make money if you like our recommendations and purchase them after clicking our affiliate link.

10 Best jack stands From Reputed Brands [According to Redditors]

It doesn’t matter whether you need the best jack stands, mid-range jack stands or the cheapest option. The article intends to help people find the best one suited for your use case. While I’ve listed the 10 best jack stands according to Redditors above, below are a few more options that have been mentioned on many subreddit posts.

1

BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair

Check On Amazon
BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair
BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair

Features

  • Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
  • Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
  • Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
2

BIG RED T43202 Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Red, 1 Pair

Check On Amazon
BIG RED T43202 Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Red, 1 Pair
BIG RED T43202 Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Red, 1 Pair

Features

  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
  • Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
3

BIG RED T42002A Torin Steel Jack Stands: Double Locking, 2 Ton (4,000 lb) Capacity, Red, 1 Pair

Check On Amazon
BIG RED T42002A Torin Steel Jack Stands: Double Locking, 2 Ton (4,000 lb) Capacity, Red, 1 Pair
BIG RED T42002A Torin Steel Jack Stands: Double Locking, 2 Ton (4,000 lb) Capacity, Red, 1 Pair

Features

  • Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
  • Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
  • Features a lifting range of 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
4

Torin 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Black, AT43002AB

Check On Amazon
Torin 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Black, AT43002AB
Torin 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Black, AT43002AB

Features

  • Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
  • Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 1-year manufacturer warranty
  • Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
5

Pro-Lift T-6906D Double Pin Jack Stand - 6 Ton, 18x12 Inch (Pack of 1)

Check On Amazon
Pro-Lift T-6906D Double Pin Jack Stand - 6 Ton, 18x12 Inch (Pack of 1)
Pro-Lift T-6906D Double Pin Jack Stand - 6 Ton, 18x12 Inch (Pack of 1)

Features

  • Double locks mechanism with both handle locks and mobility pin
  • Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
  • Sturdy stamped Steel Construction with 6 ton capacity
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in
6

BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins: 3 Ton (6,000 lb) Capacity, Red/Silver, 1 Pair

Check On Amazon
BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins: 3 Ton (6,000 lb) Capacity, Red/Silver, 1 Pair

Features

  • Wide foot base provides additional steadiness; Base is removable, allowing for compact storage when not in use
  • Lightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
  • Constructed of high-grade aluminum; Removable locking support pins provide added security and stability and is equipped with 6 locking positions
  • Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
7

Sunex 1410 10-Ton, High Height, Pin Type, Jack Stands, Pair

Check On Amazon
Sunex 1410 10-Ton, High Height, Pin Type, Jack Stands, Pair

Features

  • Large saddle with locating lugs support
  • V shaped saddle to cradle axles or other under truck components
  • Four leg steel base
  • Quick and easy height adjustment.Base Length:38.27 inch
  • Made of heavy schedule pipe for added strength and stability
8

Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair

Check On Amazon
Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair

Features

  • Height adjustment pin is attached to stand to prevent loss
  • Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy.Number of Height Adjustments:6
  • Large saddle with locating lugs support and position vehicle frame
  • Built to last
  • Item may ship in more than one box and may arrive separately
  • Four leg steel base and support tube made of heavy schedule pipe foradded strength and stability
9

TCE AT43202U Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Blue, 1 Pair

Check On Amazon
TCE AT43202U Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Blue, 1 Pair

Features

  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Includes a limited 2 year manufacturer warranty
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
10

Pro-LifT T-6903D Double Pin Jack Stands - 3 Ton

Check On Amazon
Pro-LifT T-6903D Double Pin Jack Stands - 3 Ton

Features

  • Fit type: Universal Fit
  • Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
  • Double locks mechanism with both handle locks and mobility pin
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • Sturdy stamped Steel Construction with 3 ton capacity
  • High quality cast ductile iron ratchet bar
11

TCE 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Blue, AT43002AU

Check On Amazon
TCE 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Blue, AT43002AU

Features

  • Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 2-year manufacturer warranty
  • Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
  • Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
12

OTC S022 Jack Stands - 22 Ton

Check On Amazon
OTC S022 Jack Stands - 22 Ton

Features

  • Steel tube and support column has 3 positions for height adjustment
  • Durable baked enamel finish resists corrosion
  • Ideal size for safely lifting heavy duty vehicles, Meets ASME PASE-2019 safety standards
  • Flat base welded to a square tube accommodates a square steel support column
  • Clear multilingual safety and capacity markings
13

Amazon Basics Steel Jack Auto Stands, 3 Ton Capacity, 1 Pair

Check On Amazon
Amazon Basics Steel Jack Auto Stands, 3 Ton Capacity, 1 Pair

Features

  • Durable steel frame with rustproof coating; easy-to-read weight capacity
  • Backed by an Amazon Basics limited 1-year warranty
  • Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use
  • Pair of 3-ton jack stands with 6,000-pound capacity total (when used together)
  • Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment
14

SUNEX TOOLS 6603ASJPK Aluminum 3 Ton Jack Pack

Check On Amazon
SUNEX TOOLS 6603ASJPK Aluminum 3 Ton Jack Pack

Features

  • Includes pair of 3 ton aluminum jack stands
  • Rapid-Rise Technology with dual pump pistons for fast saddle rise to load
  • Lightweight aluminum body nearly half the weight of steel jacks
  • Low profile
15

Torin AT43202B Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Black, 1 Pair

Check On Amazon
Torin AT43202B Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Black, 1 Pair

Features

  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
16

Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety (JZ060)

Check On Amazon
Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety (JZ060)

Features

  • The Ratchet Bar Is Built With Hight Quality Cast Ductile Iron With The Mulitple Position. Its Sawtooth Design Allows For Quick Height Adjustments That Lock Into Place. Height Adjustment Mechanism Allows Smooth Upward Movement While Releasing Handle Locks And Mobility Pin
  • It Is Constructed With The Sturdy Stamped Steel With A Welded Frame Design For Durability. With The Lifting Range From 16 Inches To 23-1/2 Inches, It Gives You The Abilityto Handle A Wide Range Of Vehicles Including Small Cars, Suvs, And Light Duty Trucks
  • Omega Lift Heavy Duty Jack Stands Are Tested For Reliability And Safety To Meets Or Exceeds Ansi/Pald Standards. Ideal For Home, Auto, Truck Service, Farm, And Shop Use
  • Omega Lift Jz060 Is 6 Ton Jack Stands That Are Designed To Support Your Vehicle After Lifting With A Floor Jack. It Features Wide Pyramid Foot Base To Provide The Added Strength And Stable Support
17

CARTMAN Car Jack Stands, 2 Ton (4,400 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for UTV ATV Van Sedan, 1 Pair

Check On Amazon
CARTMAN Car Jack Stands, 2 Ton (4,400 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for UTV ATV Van Sedan, 1 Pair

Features

  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 10.6" to 16.5".
  • Constructed with the sturdy stamped steel with a welded frame design for durability.
  • Pair of 2 ton jack stands with 4000 lbs capacity total (when used together) help support vehicles after lifting with a jack.
  • Meets US safety standards and includes a limited 2-year manufacturer warranty.
  • Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground.
18

Jack Boss Car Jack Stands Low Profile 2 Ton 4,000 Lbs Capacity Steel Car Lifting Stand Adjustable Jack Stand for SUV MPV Sedans 1 Pair

Check On Amazon
Jack Boss Car Jack Stands Low Profile 2 Ton 4,000 Lbs Capacity Steel Car Lifting Stand Adjustable Jack Stand for SUV MPV Sedans 1 Pair

Features

  • [Adjustable Sawtooth Design]Multi-position ratchet bar with ductile iron is designed as sawtooth style for adjusting to the proper locking position fine and engage with the bar deep in its place and removal quickly.Floor jack stand equiped with hand self-locking to support the load solidly.Keep you safe well
  • [Stable Base and After-sales ]Wide pyramid foot base of jack stand provides more strength and stability.Thick and sturdy but not overly heavy.Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty.If you have any questions,please feel free to contact us,we will be the first time to solve for you
  • [Durable Welded Frame]Car jack stand is constructed of durable mild steel and complete welded frame design for enough strong and smooth.Red jack stands are powder coated to prevent rust and the paint is evenly applied and glossy
  • [Measurement]Single Low Profile jack stand can be 2 ton(4000lb) capacity.Lifting range from min 10"to max 15".Weight:10lb.Please carefully check whether the lifting height of the car is suitable for our low profile style before placing an order, so as not to cause trouble to your vehicle
  • [Safety Top Surface]Top saddle has large concave shape contact surface area,providing the load perfect support.Heavy duty jack stands can relieve the pressure on the tires and get enough room and safety underneath the vehicle to do any repair for you
19

OTC S06 Jack Stands - 6 Ton

Check On Amazon
OTC S06 Jack Stands - 6 Ton

Features

  • Welded foot pads resist sinking into soft ground or asphalt
  • Formed and welded high-quality steel base for strength will provide years of safe vehicle holding
  • Self-locking ratchet handle cannot be released under load
  • Ideal size for holding step vans, vocational trucks and smaller heavy duty vehicles even when loaded, Meets ASME PASE-2019 safety standards
  • Durable baked enamel finish resists corrosion
20

Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity

Check On Amazon
Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity

Features

  • Heavy duty holding pins for adjustable heights
  • Height range of 13-1/3 inches to 19-2/3 inches
  • Heavy gauge steel frame helps prevent twisting
  • Sturdy welded steel construction
  • Large saddle securely supports load
21

K Tool International 2 Ton Capacity Trolley Jack & Jack Stands Set; Durable Steel Construction, Trolley 19 lbs & Stands 11 lbs; KTI63097A

Check On Amazon
K Tool International 2 Ton Capacity Trolley Jack & Jack Stands Set; Durable Steel Construction, Trolley 19 lbs & Stands 11 lbs; KTI63097A

Features

  • [JACK STAND SPECS] - Low height 10. 75", Raised height 16. 73" Base dimensions 6. 89" x 6. 57" Weight 11 lbs (Pair)
  • [DURABLE] - K Tool trolley jack and jack stands are built for extra lifting and maneuverability for all load lifting needs
  • [CAPACITY] - K Tool Trolley Jack and Jack stands are rated to hold up to 2 tons of weight or 4, 000lbs
  • [TROLLEY JACK SPECS] - Low height 5. 31" raised height 12. 99" Overall length 17. 72" Overall width 7. 87" Handle length 16. 53" Saddle diameter 2" Front wheel size 2. 6" Rear caster wheel size 1. 6" Weight 18. 74 lbs
  • [ WARRANTY] - Covered by a 1 year on material and workmanship
22

CARTMAN Car Jack Stands, 3 Ton (6,600 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for SUV MPV Truck RV, 1 Pair

Check On Amazon
CARTMAN Car Jack Stands, 3 Ton (6,600 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for SUV MPV Truck RV, 1 Pair

Features

  • Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground.
  • Pair of 3 ton jack stands with 6000 pound capacity total (when used together) help support vehicles after lifting with a jack.
  • Constructed with the sturdy stamped steel with a welded frame design for durability.
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 11.4" to 16.5".
  • Meets US safety standards and includes a limited 2-year manufacturer warranty.
23

Pro-LifT T-6902D Double Pin Jack Stand - 2 Ton, 1 Pack

Check On Amazon
Pro-LifT T-6902D Double Pin Jack Stand - 2 Ton, 1 Pack

Features

  • High quality cast ductile iron ratchet bar
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • Double locks mechanism with both handle locks and mobility pin
  • Sturdy stamped Steel Construction with 2 ton capacity
  • Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
24

Southwire MJ-707 Maxis Jax Cable Spool Jack Stands, Pair Of Foldable Jack Stands, Lifts Reels Up To 3000 lbs., Easy One-Man Operation, Fits Reels up to 48 Inches Tall; Must Use A 1-1/2" To 2" Rigid Pipe For An Axle (Not Included) , Red

Check On Amazon
Southwire MJ-707 Maxis Jax Cable Spool Jack Stands, Pair Of Foldable Jack Stands, Lifts Reels Up To 3000 lbs., Easy One-Man Operation, Fits Reels up to 48 Inches Tall; Must Use A 1-1/2" To 2" Rigid Pipe For An Axle (Not Included) , Red

Features

  • EASY ONE-MAN OPERATION: Multiple steel rollers make it easy for one person to roll off heavy wire and max lever allows one person to lift wire reels off the ground with minimal effort; this eliminates the amount of labor it normally takes to perform this task
  • HEAVY DUTY LIFTING ABILITY: Each pair lifts wire reels up to 3,000 lbs.
  • DURABLE Jaw clamps onto axle so that wire reels won’t come off or fall over; uses either a 1-1/2" to 2" rigid pipe for an axle
  • EASY TO STORE AND TRANSPORT: Breaks down into a compact storable tool
  • MAXIS JAX FOR REELS UP TO 48" TALL: A unique reel stand that will quickly set up and lift reels of wire safely and efficiently without the hassle of conventional reel stands
25

Performance Tool W41022 Ratchet Style Jack Stand Set for Lifting Vehicles During Maintenance, Yellow, 3-Ton

Check On Amazon
Performance Tool W41022 Ratchet Style Jack Stand Set for Lifting Vehicles During Maintenance, Yellow, 3-Ton

Features

  • INCLUDED: Set of two jack stands that are ideal for working on vehicles and heavy equipment in garages, shops, or automechanic maintenance bays
  • CAPACITY: 3-ton maximum capacity per pair (3000 lb. capacity per jack stand)
  • LIFT RANGE: 12 to 17-1/4 inches
  • TOUGH MATERIALS: Tough enamel finish
  • JACK LIFTING: Ratchet style for easy adjustments
26

Esco 10498 Jack Stands, 3 Ton Capacity, Pair of 2 Stands (Pack of 2), Silver

Check On Amazon
Esco 10498 Jack Stands, 3 Ton Capacity, Pair of 2 Stands (Pack of 2), Silver

Features

  • Anodized post and powder coated base to prevent rusting and corrosion
  • Maximum height 21.5 in.
  • Minimum height 13.2 in.
  • Base dimensions 12 x 12 in.
  • 3 ton or 6,000 lb. capacity per stand
  • Sold as pair
  • 10 adjustable height positions
27

RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"

Check On Amazon
RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"

Features

  • Make Your RV StableThese RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with square base design, each can support up to 6000lbs, with which you needn’t to worry about your RV move or bounce anymore
  • Height AdjustableThe height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise
  • Easy to UseSimply position each stack jack stand underneath your RV, and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use
  • Lightweight & Portable These RV jack stands weight less than 40 lbs in total, and they come with a colorful organize bag; besides, when not use, they can be compact nested together for easy storage
  • What will You Get4 Pack RV Stack Jacks come with a colorful storage bag, which are ideal for stabilizing and leveling your RV, great stabilization solution for your RV, trailer and camper, etc
28

Toolsempire Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand

Check On Amazon
Toolsempire Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand

Features

  • Height adjustableAdjusted from 49'' to 84'', Min.Height: 1250mm, Max.Height: 2128mm. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load.
  • Safe and StableHeavy duty welded steel construction, a large 24'' x 24'' tripod base adds load stability from the ground up.
  • 2 Ton Bearing-CapacityThis high jack stands is made of heavy duty no.235 steel. And the handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load.
  • Multi-ApplicationThis high-position jack stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. Ideal for supporting exhaust systems, shock absorbers and other vehicle components during under vehicle repair.
  • Easy to OperateRotary handle bears any weight easily while you adjust the height as necessary; makes it easy to replace vehicle components.
29

Kei Project Jack Stand Wall Mount Organizer Brackets Fits 2 & 3 Ton Jack Stands (Pair) (Fits 2 & 3 Ton)

Check On Amazon
Kei Project Jack Stand Wall Mount Organizer Brackets Fits 2 & 3 Ton Jack Stands (Pair) (Fits 2 & 3 Ton)

Features

  • *Jack Stands not included*
  • Material - 12 Gauge Steel with Power coated finish
  • Includes 2 Wall Mounts
  • Fits 2 Jack Stands on each mount
  • Fits Most 2 & 3 Ton Jack Stands
30

K Tool International 22 Ton Heavy Duty Jack Stands Pair (HD), Pin Style Lock, No Wiggle Saddle Base, Steel Frame, V Shaped Saddle, Adjustable Height to 19.725"; KTIHD61222

Check On Amazon
K Tool International 22 Ton Heavy Duty Jack Stands Pair (HD), Pin Style Lock, No Wiggle Saddle Base, Steel Frame, V Shaped Saddle, Adjustable Height to 19.725"; KTIHD61222

Features

  • [SUPPORT RANGE] - Minimum Height: 11.825" & Maximum Height: 19.75"
  • [HEAVY DUTY]- Heavy duty steel frame provides stability and reliability when in use
  • [HEIGHT ADJUSTMENT PINS]- Height adjustment pin connected to base by way of lanyard to prevent against loss
  • [V-SHAPED SADDLE]- V-shaped saddle to cradle axles and other truck components
  • [WARRANTY] - Covered by a 2 years warranty that covers materials and workmanship
31

ESCO 10802 Screw Style Jack Stand, Short Model, 20 Ton Capacity, 26.8" Height

Check On Amazon
ESCO 10802 Screw Style Jack Stand, Short Model, 20 Ton Capacity, 26.8" Height

Features

  • Easy to turn handle allows for accurate height extension
  • Screw style stand makes it easy to hold load at desired height and secure with locking collar
  • Sold individually
  • Built-in carrying handle for easy positioning
  • 20-Ton capacity per stand
  • Base dimensions 13 in. x 13 in.
  • Wide base - better stability & surface area for jack support
32

MUGE RACING Jack Stands Pad Universal Jack Stand Adapter for Jack Stand Universal Rubber Slotted Frame Rail Pinch Welds Protector,4PACK

Check On Amazon
MUGE RACING Jack Stands Pad Universal Jack Stand Adapter for Jack Stand Universal Rubber Slotted Frame Rail Pinch Welds Protector,4PACK

Features

  • SAFE & HEAVY DUTY CONSTRUCTION - Made of heavy duty construction and durable rubber material for 2-4 ton floor jack. Maximum load bearing: 2-4 Ton.
  • COMPATIBLITY - NOT fit for Torin T42002! Please check this jack rubber pad is suitable for your jack's or not before purchasing. The jack pads adapter fit most any type of body and jack, specifically compatible with Torin Big Red T43002.
  • EXTRA STABILITY-ANTI SLIP - The bottom of the jack stands pad has a textured and rubberized surface to avoid any slippage from a jack.
  • PORTABLE - Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds.
  • A MUST FOR PROTECTING YOUR CAR - MUGE RACING Jack pad adapter is designed to be sturdy enough to support your car.It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components.
33

Pipe Stand V Head Adjustable Height Folding Portable (Red)

Check On Amazon
Pipe Stand V Head Adjustable Height Folding Portable (Red)

Features

  • V Head Open Size: 8.7"
  • Min. Height: 28.3"
  • Load Capacity: 2500 lb.
  • Max. Height: 48.4"
  • Fold up for easy portability.
34

AFF Viking 4 Ton Ratcheting Style Jack Stand Set, Locking Pawl, 55040

Check On Amazon
AFF Viking 4 Ton Ratcheting Style Jack Stand Set, Locking Pawl, 55040

Features

  • USE – Sold and intended for use in pairs
  • STABILITY – Jack stand features wide base for added stability
  • DURABLE – Welded design for maximum strength and durability
  • STRENGTH – Ratchet bar is constructed with ductile iron for increased strength and safety; these jack stands are built for the most demanding conditions, fit for any job
  • FEATURES – Locking pawl with built-in counter weight to secure ratchet bar at designated heights; keeping you safe in the most dangerous conditions
35

OTC HDJ5P Air/Hydraulic Service Jack - 5 Ton

Check On Amazon
OTC HDJ5P Air/Hydraulic Service Jack - 5 Ton

Features

  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram
  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts
36

American Lifting Off-Road Jack Stands – 3.5 Ton (7000 Lbs) Safety Pin Style Heavy Duty Stand – 30-Inch Max Lift Height Perfect for SUVs Trucks in Garage Shop Outdoor,Green Black

Check On Amazon
American Lifting Off-Road Jack Stands – 3.5 Ton (7000 Lbs) Safety Pin Style Heavy Duty Stand – 30-Inch Max Lift Height Perfect for SUVs Trucks in Garage Shop Outdoor,Green Black

Features

  • AS TOUGH AS OUR USERS – The American Lifting Off-Road Jack Stand is Made in USA with the High-Grade Hot Rolled Steel for the Toughness and Longer Duration. It’s Uniquely Designed to Support SUVs or Trucks with the Max Height of 30”.
  • PROUDLY MADE IN THE USA – The American Lifting Off-Road Jack Stand Is Proudly Made in the USA, And We Stand Behind Our Products. Please Contact Us with Any Questions or Concerns and We Gladly Assist You and While We Strive for the Perfection. We Also Understand That Things Come Up and It Is Our Goal to Go Beyond Your Expectations to Resolve Any Issues.
  • Fit type: Universal
  • ANTI-SINK PLATE – Not Only to be Used in Your Shops or Garages, Also Designed to be Used in the Outdoor Environments. American Lifting Off-Road Stands Incorporates the Anti-Sink Plate Design to Ensure It will not Sink in Sand, Gravel or Muddy Outdoor Environments.
  • SAFETY SECURITY PINS – The Safety Security Pins Locks the Jack Stands from Coming Down, It Adds Extra Safety as Compared to Sawtooth Design Ratchet Bar Which Means You Can Move the Stands Around Your Shop While Keeping Rack Bar Secured in Place. And, The Galvanized Steel Cable Attaches the Security Pin to the Stands, Which Means You Always the Security Pin at Your Fingertips.
  • HIGH SUPPORTING RANGE - The Support Range from 18” to 30” in Height, That Has Unique Advantage as Compared to Standard Jack Stands, which Makes These Stands Perfect for Any Lifted SUV or truck. Also, There Are Two Built-in Carry Handles on Each Stand to Make It Easy to Position the Jack Stand as Needed.
37

Arcan 6-Ton Steel Jack Stands (ALJS6)

Check On Amazon
Arcan 6-Ton Steel Jack Stands (ALJS6)

Features

  • CONTOURED SADDLE: A large contoured saddle with locating lugs helps support and position vehicle frame.
  • COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market.
  • BASE PADS: Prevents the jack from sinking into ashphalt and provide stable footing for the jack stands.
  • RUGGED: The welded construction and alloyed steel offer years of support.
  • COUNTERWEIGHTED PAWL: Locks in place securely to prevent slipping, while allowing easy adjustments.
  • WIDE STANCE BASE: 10. 5" by 11. 5" base delivers superior stability.
  • WORKING RANGE: 15. 5" to 24"
38

Omega 32107B Black High Lift Jack Stand - 10 Ton Capacity

Check On Amazon
Omega 32107B Black High Lift Jack Stand - 10 Ton Capacity

Features

  • Large saddle securely supports load
  • High maximum height of 47 inches
  • Heavy gauge steel frame helps prevent twisting
  • Sturdy welded steel construction
  • Heavy duty holding pins for adjustable heights
39

CARTMAN Car Jack Stands, 6 Ton (12,000 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for SUV MPV Truck RV, 1 Pair

Check On Amazon
CARTMAN Car Jack Stands, 6 Ton (12,000 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for SUV MPV Truck RV, 1 Pair

Features

  • Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground.
  • Constructed with the sturdy stamped steel with a welded frame design for durability.
  • Pair of 6 ton jack stands with 12000 lbs capacity total (when used together) help support vehicles after lifting with a jack.
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 14.6" to 23".
  • Meets US safety standards and includes a limited 2-year manufacturer warranty.
40

RUTU Hydraulic Motorcycle Lift Stand - Heavy-Duty Steel Maintenance Hoist Rack for ATV, UTV, Dirt Bike, Snowmobile - Adjustable Motorcycle Stand Lift with 440Lbs Capacity - Bike Repair Accessories

Check On Amazon
RUTU Hydraulic Motorcycle Lift Stand - Heavy-Duty Steel Maintenance Hoist Rack for ATV, UTV, Dirt Bike, Snowmobile - Adjustable Motorcycle Stand Lift with 440Lbs Capacity - Bike Repair Accessories

Features

  • Versatile Garage Equipment - The bike lift accommodates most motorcycles, as well as ATVs, UTVs, and even snowmobiles. It's suitable for off-road bikes with a 295mm-390mm engine ground clearance.
  • Spacious & Higher Weight Capacity - The non-slip platform measures 280x200mm. It has a maximum load capacity of 440 lbs. which is over 100 lbs. more than other maintenance racks for motorcycles.
  • Sturdy Construction, Utilitarian Design - This dirt bike stand lift is made from premium heavy-duty steel. The hydraulic pumps operate smoothly and a built-in damper makes lowering motorcycles easier.
  • For Repairs, Maintenance, & Storage - This bike jack stand is perfect for doing tire, oil and filter changes as well as cleaning your ride. It also works as a great place to park during winter.
  • Steady & Non-Slip Motorcycle Lift Stand - Fitted with a safety lock to prevent bikes from falling. The nitrile rubber platform is resilient against oil and provides a stable and scratch-proof work surface.
41

Pro-LifT G-4630JSCB 3 Ton Heavy Duty Floor Jack/Jack Stands and Creeper Combo - Great for Service Garage Home Uses - Black

Check On Amazon
Pro-LifT G-4630JSCB 3 Ton Heavy Duty Floor Jack/Jack Stands and Creeper Combo - Great for Service Garage Home Uses - Black

Features

  • Fit Type: Universal Fit
  • Pro Lift G-4630JSCB Mechanics Set features 3 Garage Essentials in one convenient package. It comes with 3 Ton Garage Jack, 3 Ton Jack Stand, and 300 lbs detachable Creeper.
  • The Garage Jack with the the 3 Ton Capacity features the steel frame construction for the added strength and durability. With the 3" roller casters, they ensure the portability and stability.
  • The Garage Jack is designed to lift, but not support one end of a vehilce. It must be used in conjunction with the pair of 3 Ton jack stands provided.
  • The creeper has the 40" in length with the capacity of 300 lbs. With 6 casters, it provides users with the easy maneuverability.
  • The jack stands has the 3 Ton capacity. Install the ratchet bar into the frame. The ratchet portion of bar must be aligned with the ratchet pawl.
42

BIG RED T42012 Torin Steel Jack Stand: 2 Ton (4,000 lb) Capacity, Red, Single Jack

Check On Amazon
BIG RED T42012 Torin Steel Jack Stand: 2 Ton (4,000 lb) Capacity, Red, Single Jack

Features

  • Lightweight jack stand is used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Adjustable height ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity
  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
43

LegUp Motorcycle Jack Stand (Black) – Lightweight, Compact & Perfectly Portable for Front or Rear Hoist Maintenance On-The-Go [Machine Grade Aluminum] Universal Fit for Off-Road and Dual Sport Bikes

Check On Amazon
LegUp Motorcycle Jack Stand (Black) – Lightweight, Compact & Perfectly Portable for Front or Rear Hoist Maintenance On-The-Go [Machine Grade Aluminum] Universal Fit for Off-Road and Dual Sport Bikes

Features

  • DURABLE, MACHINE-GRADE MATERIALS – Constructed from aluminum, the LegUp jack stand is corrosion-resistant and incredibly durable for frequent, short-term use in any environment.
  • VERSATILE & EASY TO USE – The LegUp Jack Stand works perfectly for a wide variety of bikes including off-road, and dual-sport bikes. No complicated user manual or tech – intuitive and simple to set up and take down in just seconds.
  • LEGUP GOES WITH YOU ANYWHERE – With a weight of just 9 ounces and length of only 11 inches (extends up to 19 inches), this is the most compact and portable jack stand on the market. Toss in your camelback, back-pack or saddle bag for adventure touring and off-roading.
  • DESIGNED BY MOTORCYCLE LOVERS & MADE IN THE USA– The development of this smart jack stand was many years and protypes in the making by a father-son team of lifelong motorcycle riders. The LegUp endured rigorous testing and tweaking until it met our strict standards.
  • STABLE, 3-POINT HOIST EVERY TIME – Uses your own bike’s kick-stand to form an incredibly stable and secure, 3-point stand so you can focus on the job without worrying about your bike falling down mid-adjustment. Built to be used on front or rear wheels.
44

OTC 1778B 12-Ton Capacity Low Profile Jack Stand - 19 to 29-1/2 Inch Range

Check On Amazon
OTC 1778B 12-Ton Capacity Low Profile Jack Stand - 19 to 29-1/2 Inch Range

Features

  • OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity low profile jack stand has the strength and stability needed for big jobs
  • Round tube center post features 9 height adjustment settings; high strength steel locking pin is attached to the stand with a chain so it can't go missing
  • 19 inch to 29-1/2 inch height range
  • Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces
45

OTC UH15 1,500 Lb Capacity Auxiliary Stand

Check On Amazon
OTC UH15 1,500 Lb Capacity Auxiliary Stand

Features

  • Intended for use in allowing manipulation of components for installation or removal only - NOT intended to stabilize or support vehicles
  • Specifications: 1,500 lb. capacity; 80.75 inch max. height; 54.25 inch min. height; 11-7/8 inch flat round footprint; Threaded rod adjustment with bearing-mounted T-handle; 5-1/4 x 1-1/4 inch U-shape saddle; Meets ASME PASE-2014
  • Adjustable saddle sits atop a fixed column and base, providing high-reach assistance to a technician for removing or installing vehicle components like transmissions, u-joints, radiators, driveshafts, exhaust systems, and catalytic converters
  • Engineered for rugged daily use by professionally trained vehicle technicians in a shop environment
  • OTC's UH15 1,500 lb. Capacity Auxiliary Stand is designed for use under hoist to provide partial support for positioning of vehicle components during their installation and removal
46

Motorcycle Dirt Bike Lift Jack Hoist Stand Table Height Adjustable Lifting Stand

Check On Amazon
Motorcycle Dirt Bike Lift Jack Hoist Stand Table Height Adjustable Lifting Stand

Features

  • Fully adjustable deck height allows fit for most bikes. Adjustable range: 25.2 cm (9.92 in) - 46 cm (18.11 in). The adjustable top plate is secured with a lock nut to ensure safety.
  • Made of solid steel. The durable anti-slip pad helps prevent bike slippage.
  • Maximum lifting weight is 150 kg (330 lbs); Top plate size: 28 cm (11 in) *17.5 cm (6.9 in).
  • Easy to assemble. The safety pin is connected to the arm so that it won't get lost.
  • Allows easy and controlled lifting of your off-road motorcycle.
47

3Ton Axle Jack Stand Adjustable 3 Type Heights Trolley Car Van Caravan Repair

Check On Amazon
3Ton Axle Jack Stand Adjustable 3 Type Heights Trolley Car Van Caravan Repair

Features

  • Size:370mmx330mmx285mm
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • High quality strong, sturdy axle stand.Each axle stand is rated up to 3 ton load capacity.
  • Three kinds of heights can be adjusted flexibly.
  • Adjustable Design for quick, easy height adjustment.Perfect for most automotive maintenance and repair jobs.

27 Best Brands in 2022: Loved by Redditors

Below is the the brands based on their popularity among known redditors and mentions of the products on different subreddit threads:

  • BIG RED
  • Torin
  • Pro-LifT
  • Sunex Tools
  • TCE
  • OTC
  • Amazon Basics
  • Omega Lift
  • CARTMAN
  • Jack Boss
  • Omega
  • K Tool International
  • Southwire
  • Performance Tool
  • ESCO
  • RVGUARD
  • Toolsempire
  • Kei Project
  • muge racing
  • Yararday
  • AFF
  • American Lifting
  • ARCAN
  • RUTU
  • LegUp
  • JFG RACING
  • AUTOXBERT

Buying Guide

Choosing the right jack stands can be difficult and requires research. I’ve created this buyer’s guide after analyzing multiple subreddits and interviewing redditors who shop a lot to help you figure out the important things to consider when buying a jack stands.

1. Trust Redditors But Know Your Requirements.

Even though I've listed the best-rated jack stands according to redditors, there are chances that even the best option might not have all the features you need. That’s why make sure that the option you’ve picked has everything you need.

2. Choose the right brand for your needs.

I’ve listed out the best brands according to the Redditors above, but that doesn’t mean you can randomly pick any jack stands from a brand and buy it. You need to make sure that the brand offers proper service and has customer support in or near your location. What’s the point in buying a product that doesn’t have a service center around your area and having to go through the hassle of traveling far away to get it repaired.

3. Compare Historical Prices & Current Prices.

Redditors believe in “value for money” and that’s why there’s a chance that their recommendation would be based on the price of the jack stands that day.

For instance, BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair might have been cheaper when the Redditor suggested it. However, if its price has increased then, you shall consider getting another recommendation that offers the same features but is more value for money.

4. Don’t buy it if you don’t need it.

Online shopping has made purchasing a jack stands very easy, you just click the buy button and the item gets delivered at your doorstep. However, that’s what makes you vulnerable to buying things that you don’t need. So make sure that you’re only purchasing this if you actually need it or would use it.

5. Check other best-sellers lists.

While redditors are known for their value for money approach, brands have gotten smarter. For instance, these days brands themselves create reddit accounts with “high karma” and promote their products. So make sure to check best-seller lists on other websites too.

6. Watch Reviews on YouTube.

Although, sites like Amazon display everything about the product in detail and I’ve shared the important details above. There are times when you’d like to see it in action, that’s where watching a jack stands review on YouTube would help. You’ll also get to know more about the product and real-life use cases.

Verdict

The article tries to answer all your questions both in terms of listing and top brands. But if you’re confused, below are my quick recommendations. You can choose based on your requirement:

  • If you want nothing but the best, go or BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair.
  • Like redditors, if you want more of a value for money option - consider Torin 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Black, AT43002AB.
  • If you’re looking for a cheap jack stands, look into K Tool International 22 Ton Heavy Duty Jack Stands Pair (HD), Pin Style Lock, No Wiggle Saddle Base, Steel Frame, V Shaped Saddle, Adjustable Height to 19.725"; KTIHD61222.

I’ve tried my best to list out the best jack stands based on both my manual research and AI bots. But if you still aren’t sure which product to bet on, comment below your doubts and I’ll be happy to clarify.

Related Articles
Emma Green

Emma Green was the first person to join the team and believe in the potential that the platform had. She has never looked back since then and only worked towards the growth of the content on this platform.

Comments
There are no comments yet.
Got any query? or Comment?

Please put your query or comment in the below box. You email address will not be published. Required fields are marked *

Your message is required.